安装完成后ntsysv停掉一些不必要的服务
配置网络
------第一张网卡----------
Ip address:192.168.1.254
netmask:255.255.255.0
Net device:eth0
------第二张网卡----------
Ip address:192.168.254.254
Netmask:255.255.255.0
Net device:eth1
1 安装adsl
#adsl-setup
[root@LinuxSir02 root]# adsl-setup
Welcome to the ADSL client setup. First, I will run some checks on
your system to make sure the PPPoE client is installed properly...
LOGIN NAME
Enter your Login Name (default root): [color=red]ADSL提供商给的用户名，写在这里[/color]
INTERFACE
Enter the Ethernet interface connected to the ADSL modem
For Solaris, this is likely to be something like /dev/hme0.
For Linux, it will be ethX, where 'X' is a number.
(default eth0): eth1[color=red]这是ADSL通过第一台机器的网卡eth1提供上网[/color]
Do you want the link to come up on demand, or stay up continuously?
If you want it to come up on demand, enter the idle time in seconds
after which the link should be dropped. If you want the link to
stay up permanently, enter 'no' (two letters, lower-case.)
NOTE: Demand-activated links do not interact well with dynamic IP
addresses. You may have some problems with demand-activated links.
Enter the demand value (default no):[color=red]在这里按一下回车就行了。[/color]
DNS
Please enter the IP address of your ISP's primary DNS server.
If your ISP claims that 'the server will provide dynamic DNS addresses',
enter 'server' (all lower-case) here.
If you just press enter, I will assume you know what you are
doing and not modify your DNS setup.
Enter the DNS information here: 202.101.172.35[color=red]这是DNS，最好用你本地电信给的杭州电信的主dns[/color]Please enter the IP address of your ISP's secondary DNS server.
If you just press enter, I will assume there is only one DNS server.
Enter the secondary DNS server address here: 202.96.104.18[color=red]这是第二个DNS，也是电信给的。[/color]
PASSWORD
Please enter your Password:[color=red]在这里把ADSL提供商给的密码写上[/color]
Please re-enter your Password:
USERCTRL
Please enter 'yes' (two letters, lower-case.) if you want to allow
normal user to start or stop DSL connection (default yes): yes
FIREWALLING
Please choose the firewall rules to use. Note that these rules are
very basic. You are strongly encouraged to use a more sophisticated
firewall setup; however, these will provide basic security. If you
are running any servers on your machine, you must choose 'NONE' and
set up firewalling yourself. Otherwise, the firewall rules will deny
access to all standard servers like Web, e-mail, ftp, etc. If you
are using SSH, the rules will block outgoing SSH connections which
allocate a privileged source port.
The firewall choices are:
0 - NONE: This script will not set any firewall rules. You are responsible
for ensuring the security of your machine. You are STRONGLY
recommended to use some kind of firewall rules.
1 - STANDALONE: Appropriate for a basic stand-alone web-surfing workstation
2 - MASQUERADE: Appropriate for a machine acting as an Internet gateway
for a LAN
Choose a type of firewall (0-2): 2
Start this connection at boot time
Do you want to start this connection at boot time?
Please enter no or yes (default no):yes
** Summary of what you entered **
Ethernet Interface: eth0
User name: ADSL用户名
Activate-on-demand: No
Primary DNS: 202.101.172.35
Secondary DNS: 202.96.104.18
Firewalling: MASQUERADE
User Control: yes
Accept these settings and adjust configuration files (y/n)?y
相关命令
用adsl-start拨号
adsl-stop下线
adsl-status 查看状态!
adsl-start