1. 前言
以太头中除了6字节目的MAC地址、6字节源MAC地址外，还有两字节的以太帧类型值，如IPv4为0x0800，ARP为0x0806等，网卡驱动收到以太帧后通过接口函数netif_receive_skb()(netif_rx实际最后也是调用netif_receive_skb)交到上层，而这个接口函数就完成对以太帧类型的区分，交到不同的协议处理程序。如果想自己编写某一以太类型帧的处理程序，需要自己添加相应的代码。以下为Linux内核2.6代码。
2. 数据结构
每种协议都要定义一个packet_type结构，引导进入相关的协议数据处理函数，所有节点组成一个链表(HASH链表)。
/* include/linux/netdevice.h */
struct packet_type {
__be16 type; /* This is really htons(ether_type). */
struct net_device *dev; /* NULL is wildcarded here */
int (*func) (struct sk_buff *,
struct net_device *,
struct packet_type *,
struct net_device *);
void *af_packet_priv;
struct list_head list;
}; |
参数说明：
type：以太帧类型，16位。
dev：所附着的网卡设备，如果为NULL则匹配全部网卡。
func：协议入口接收处理函数。
af_packet_priv：协议私有数据。
list：链表扣。
一般各协议的packet_type结构都是静态存在，初始化时只提供type和func两个参数就可以了，每个协议在初始化时都要将此结构加入到系统类型链表中。
3. 处理函数
3.1 添加节点
/* net/core/dev.c */
/**
* dev_add_pack - add packet handler
* @pt: packet type declaration
*
* Add a protocol handler to the networking stack. The passed &packet_type
* is linked into kernel lists and may not be freed until it has been
* removed from the kernel lists.
*
* This call does not sleep therefore it can not
* guarantee all CPU's that are in middle of receiving packets
* will see the new packet type (until the next received packet).
*/
void dev_add_pack(struct packet_type *pt)
{
int hash;
spin_lock_bh(&ptype_lock);
// 如果类型是全部以太类型，则节点链接到ptype_all链
if (pt->type == htons(ETH_P_ALL)) {
netdev_nit++;
list_add_rcu(&pt->list, &ptype_all);
} else {
// 根据协议类型取个HASH，共15个HASH链表
hash = ntohs(pt->type) & 15;
// 将节点链接到HASH链表中，list_add_rcu是加了smp_wmb()保护的list_add链表操作
list_add_rcu(&pt->list, &ptype_base[hash]);
}
spin_unlock_bh(&ptype_lock);
} |
3.2 删除节点
/**
* __dev_remove_pack - remove packet handler
* @pt: packet type declaration
*
* Remove a protocol handler that was previously added to the kernel
* protocol handlers by dev_add_pack(). The passed &packet_type is removed
* from the kernel lists and can be freed or reused once this function
* returns.
*
* The packet type might still be in use by receivers
* and must not be freed until after all the CPU's have gone
* through a quiescent state.
*/
void __dev_remove_pack(struct packet_type *pt)
{
struct list_head *head;
struct packet_type *pt1;
spin_lock_bh(&ptype_lock);
// 根据协议类型找是在ptype_all表还是某一HASH链表中
if (pt->type == htons(ETH_P_ALL)) {
netdev_nit--;
head = &ptype_all;
} else
head = &ptype_base[ntohs(pt->type) & 15];
// 直接用地址比对进行查找，而不是类型，因为同一个类型也可能有多个节点
list_for_each_entry(pt1, head, list) {
if (pt == pt1) {
list_del_rcu(&pt->list);
goto out;
}
}
printk(KERN_WARNING "dev_remove_pack: %p not found.\n", pt);
out:
spin_unlock_bh(&ptype_lock);
}
/**
* dev_remove_pack - remove packet handler
* @pt: packet type declaration
*
* Remove a protocol handler that was previously added to the kernel
* protocol handlers by dev_add_pack(). The passed &packet_type is removed
* from the kernel lists and can be freed or reused once this function
* returns.
*
* This call sleeps to guarantee that no CPU is looking at the packet
* type after return.
*/
// 只是__dev_remove_pack()的包裹函数
void dev_remove_pack(struct packet_type *pt)
{
__dev_remove_pack(pt);
synchronize_net();
} |
4. 实例
4.1 IP
/* net/ipv4/af_inet.c */
static struct packet_type ip_packet_type = {
.type = __constant_htons(ETH_P_IP),
.func = ip_rcv, // IP接收数据的入口点
};
static int __init inet_init(void)
{
......
dev_add_pack(&ip_packet_type);
...... |
