开源中文网

您的位置: 首页 > IBM Aix > 正文

安装BMR 4.7 For AIX5.2-005故障排除

来源:  作者:

安装BMR 4.7 For AIX5.2-005故障排除!

前几天配BMR4.7 for AIX5.2-005碰上了点麻烦,费了半天劲才搞定。
1. 安装BMR4.7的时候报错,错误信息如下。
wbportal:/usr/lpp/BareMetal./bmrsetupclient

Bare Metal Restore Client Configuration

Verifying environment...
Verification successful.

Enter BMR main server's IP hostname that resolves to an IP address
usable for routine BMR communications []: bakupsvr
Enter the BMR main server port number [8362]:
Enter this NetBackup client name [wbportal_bkup]:
Running bmrsavecfg for the first time (this may take a few minutes).
/dev/ipldevice not found

0301-150 bosboot: Invalid or no boot device specified!
usage: bosboot {-a | -v} [-d device] [-p proto] [-k kernel] [-l lvdev]
[-b file] [-M serv|norm|both] [-D|-I] [-LTq]
Where:
-a Create boot image and write to device or file.
-v Verify, but do not build boot image.
-d device Device for which to create the boot image.
-p proto Use given proto file for RAM disk file system.
-k kernel Use given kernel file for boot image.
-l lvdev Target boot logical volume for boot image.
-b file Use given file name for boot image name.
-D Load kernel debugger.
-I Load and Invoke kernel debugger.
-M norm|serv|both Boot mode - normal or service.
-T platform Specifies the hardware platform type.
-q Query disk space required to create boot image.
-L Enable MP locks instrumentation.
expr: syntax error
/usr/bin/mkvgdata[406]: test: argument expected
syntax error The source line is 1.
The error context is
{print $4 + >;>;>; } <<<
awk: The statement cannot be correctly parsed.
The source line is 1.
expr: syntax error
expr: syntax error
/usr/bin/mkvgdata[739]: test: argument expected
expr: syntax error
expr: syntax error
bmrsavecfg completed without errors.

The BMR command &#39;bmrsavecfg&#39; must be run before each backup of this system.
NetBackup calls the bpstart_notify script (found in /usr/openv/netbackup/bin)
each time the client starts a backup operation. Hence, running &#39;bmrsavecfg&#39;
from the bpstart_notify script will ensure that &#39;bmrsavecfg&#39; runs before
each backup of this system.


Configuration of client wbportal_bkup,bakupsvr completed successfully.
Before a system restore can take place, at least one complete
system backup must be taken from the backup server.
wbportal:/usr/lpp/BareMetal

2. 解决方法:
错误提示中又"/dev/ipldevice not found",一查再这台机器上还真没有,到别的机器上一看都有。看来是这的问题了。听V的人说bmrsavecfg会调用mkszfile,单独运行这个命令报同样的错。
wbportal:/mkszfile
/dev/ipldevice not found

0301-150 bosboot: Invalid or no boot device specified!
usage: bosboot {-a | -v} [-d device] [-p proto] [-k kernel] [-l lvdev]
[-b file] [-M serv|norm|both] [-D|-I] [-LTq]
Where:
-a Create boot image and write to device or file.
-v Verify, but do not build boot image.
-d device Device for which to create the boot image.
-p proto Use given proto file for RAM disk file system.
-k kernel Use given kernel file for boot image.
-l lvdev Target boot logical volume for boot image.
-b file Use given file name for boot image name.
-D Load kernel debugger.
-I Load and Invoke kernel debugger.
-M norm|serv|both Boot mode - normal or service.
-T platform Specifies the hardware platform type.
-q Query disk space required to create boot image.
-L Enable MP locks instrumentation.

wbportal:/wbportal:/
看来问题不是出在BMR上,是AIX的问题。
查了查IBM的手册/dev/ipldevice,应该再安装完OS的时候就自动创建了。

用下面的方法可以重新创建/dev/ipldevice。
1. make sure which is boot device
lslv -m hd5

this command will returned following. So hdisk0 is boot device in this sample.
# lslv -m hd5
hd5:N/A
LP PP1 PV1 PP2 PV2 PP3 PV3
01 0001 hdisk0

2. Re-link boot device to /dev/ipldevice
ln rhdisk0 /dev/ipldevice
# ls -l ipldevice rhdisk0
crw------- 2 root system 14, 2 Sep 20 2004 ipldevice
crw------- 2 root system 14, 2 Sep 20 2004 rhdisk0

创建完 /dev/ipldevice,bmr终于安装成功。 

Tags:BMR AIX5
关于开源中文网 - 联系我们 - 广告服务 - 网站地图 - 版权声明