开源中文网

您的位置: 首页 > 树莓派 > 正文

Debian Raspberry Pi加速上网体验之设置Squid3透明代理

来源: 网络整理  作者: 佚名

面文章给各位同学介绍一篇关于Debian Raspberry Pi加速上网体验之设置Squid3透明代理,希望文章对大家有帮助。

首先我们已经配置好了无线热点,如果不清楚的话可以参考我前面的文章,配置好的效果是通过无线网卡连接到树莓派,然后流量经过wlan0网卡转到eth0然后出口,也就是说eth0相当于我们路由器的WAN口,而wlan0相当于局域网LAN口,理清这个关系后下面我们继续。
首先要安装squid3,这里可以直接通过下面的命令进行:

apt-get install squid3
之前大家应该记得我设置无线路由功能时使用了下面的iptables配置:

sudo iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE
sudo iptables -A FORWARD -i eth0 -o wlan0 -m state --state RELATED,ESTABLISHED -j ACCEPT
sudo iptables -A FORWARD -i wlan0 -o eth0 -j ACCEPT
如果我们已经做了上述配置,那么下面只要再运行一条iptables命令就可以把80端口的流量转到squid3的3128端口了:

iptables -t nat -A PREROUTING -i wlan0 -p tcp --dport 80 -j REDIRECT --to-ports 3128
替换之前我们设置的iptables.ipv4.nat,当然先备份一下:

sudo mv /etc/iptables.ipv4.nat /etc/iptables.ipv4.nat.old
sudo sh -c "iptables-save > /etc/iptables.ipv4.nat"
做完上述命令后你会发现现在所有的网页都出现了squid的默认拒绝访问的画面,说明squid3已经开始工作了,下面我们需要对其进行配置,参考如下的patch编辑配置文件/etc/squid3/squid.conf:

-- /etc/squid3/squid.conf.orig 2013-02-25 11:31:23.839560066 +1300
+++ /etc/squid3/squid.conf      2013-02-26 09:07:15.388951441 +1300
@@ -702,6 +702,7 @@
#acl localnet src 192.168.0.0/16       # RFC1918 possible internal network
#acl localnet src fc00::/7       # RFC 4193 local private network range
#acl localnet src fe80::/10      # RFC 4291 link-local (directly plugged) machines
+acl localnet src 192.168.42.0/24

acl SSL_ports port 443
acl Safe_ports port 80         # http
@@ -828,7 +829,7 @@
# We strongly recommend the following be uncommented to protect innocent
# web applications running on the proxy server who think the only
# one who can access services on "localhost" is a local user
-#http_access deny to_localhost
+http_access deny to_localhost

#
# INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS
@@ -837,7 +838,7 @@
# Example rule allowing access from your local networks.
# Adapt localnet in the ACL section to list your (internal) IP networks
# from where browsing should be allowed
-#http_access allow localnet
+http_access allow localnet
http_access allow localhost

# And finally deny all other access to this proxy
@@ -1133,7 +1134,7 @@
#

# Squid normally listens to port 3128
-http_port 3128
+http_port 3128 intercept

#  TAG: https_port
# Note: This option is only available if Squid is rebuilt with the
@@ -2073,7 +2074,7 @@
#      accessed frequently in memory to improve performance whilst low
#      enough to keep larger objects from hoarding cache_mem.
#Default:
-# maximum_object_size_in_memory 512 KB
+maximum_object_size 128000 KB

#  TAG: memory_replacement_policy
#      The memory replacement policy parameter determines which
@@ -2229,7 +2230,7 @@
#

# Uncomment and adjust the following to add a disk cache directory.
-#cache_dir ufs /var/spool/squid3 100 16 256
+cache_dir ufs /var/spool/squid3 1000 16 256

#  TAG: store_dir_select_algorithm
#      Set this to 'round-robin' as an alternative.
@@ -2611,7 +2612,7 @@
#      Note2, for Debian/Linux the default of logfile_rotate is
#      zero, since it includes external logfile-rotation methods.
#Default:
-# logfile_rotate 0
+logfile_rotate 10

#  TAG: emulate_httpd_log      on|off
#      The Cache can emulate the log file format which many 'httpd'
@@ -3673,7 +3674,7 @@
#      during shutdown mode.  Any active clients after this many
#      seconds will receive a 'timeout' message.
#Default:
-# shutdown_lifetime 30 seconds
+shutdown_lifetime 2 seconds

# ADMINISTRATIVE PARAMETERS
# -----------------------------------------------------------------------------注意这里maximum_object_size,由于我通过free -m查看发觉内存已经被消耗了200多M了,所以综合考虑我让squid3再用128M作为内存缓存用;cache_dir ufs /var/spool/squid3 1000 16 256根据个人情况设置,我根据存储卡大小设置为1000,也就是1GB。
设置完成后通过squid3 -k parse检查一下有没有错误,没有错误的话直接通过squid3 -k reconfigure加载配置。
现在可以正常浏览网页了吧?
下面讲解如何屏蔽广告站点,首先还是编辑squid3的配置文件/etc/squid3/squid.conf,添加如下内容:

## disable ads ( http://pgl.yoyo.org/adservers/ )
acl ads dstdom_regex "/etc/squid/ad_block.txt"
http_access deny ads
#deny_info TCP_RESET ads建立广告列表更新脚本ad_servers_newlist.sh:
#### Calomel.org  ad_servers_newlist.sh
#
## get new ad server list
wget -O /etc/squid3/ad_block.txt 'http://pgl.yoyo.org/adservers/serverlist.php?hostformat=squid-dstdom-regex&showintro=0&mimetype=plaintext'

## refresh squid
/usr/sbin/squid3 -k reconfigure
具体的被屏蔽的广告列表见这里,好了,下面需要运行一下这个脚本:
sudo sh ad_servers_newlist.sh
然后任意访问刚才广告列表中列出的网址,看看是不是被squid3拦截了?

今天在树莓上架设了Web服务器,然后发现在eth0没有联网的情况下,访问这个Web服务会异常缓慢,于是决定改写上面的iptables规则,假设树莓主机wlan0的IP地址是192.168.43.1,我们可以让所有访问这个地址的不进行转发,最终的规则整理如下,当然在操作前建议使用sudo iptables -t nat -F清空先前的设定:

sudo iptables -t nat  -A PREROUTING -i wlan0 -p tcp -d 192.168.43.1 --dport 80 -j ACCEPT
sudo iptables -t nat -A PREROUTING -i wlan0 -p tcp --dport 80 -j REDIRECT --to-ports 3128
sudo iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE
sudo iptables -A FORWARD -i eth0 -o wlan0 -m state --state RELATED,ESTABLISHED -j ACCEPT
sudo iptables -A FORWARD -i wlan0 -o eth0 -j ACCEPT

Tags:
相关文章列表:
关于开源中文网 - 联系我们 - 广告服务 - 网站地图 - 版权声明